Symptom
Possible Causes and Solutions
If the skin is dry, moisten with water, lotion, or gel, and then use the device.
If the level is low, increase the level of EMS with the level button.
EMS (electric muscle stimulation)
When you apply the device to insensitive parts of the body, change the application position (page 18-21).
is not generated (not felt)
The degree of feeling is different depending on individuals.
EMS electrode are not in contact with the skin.
Apply the entire EMS electrode 1 or 2 to the skin with Exercise mode/Cell-care mode.
EMS (electric muscle stimulation)
Apply the entire EMS electrode 3 or 4 to the skin with Face mode.
is painful
If the level is too high, decrease the level of EMS with the level button.
Main unit is too hot
If the body of the device is hot, turn off the power and use it again after more than 10 minutes.
25