Table of Contents
Advertisement
Quick Links
This integration guide applies to the Absoluta series of access control panels from Bentel Security. (Test
reference: model ABS104 control panel and M-Touch keypad)
Overview
exacqVision can be integrated with Bentel Absoluta series Control Panels. Configuration controls and
real-time feedback have been added into the exacqVision client giving the user control and monitoring
capabilities of the system.
NOTE: This integration applies only to the Bentel Access Control Panel/Keypad equipment with
firmware version 3.50 or later.
For more information about control panel and keypad equipment, please visit
www.bentelsecurity.com
Purpose
The purpose of this document is to provide guidance for integrating Bentel control panel equipment
with exacqVision and using the exacqVision client for connecting, controlling and monitoring the access
control system.
NOTE: This guide does not cover the installation and configuration of Bentel security equipment in
general.
Advertisement
Table of Contents
Related Manuals for Bentel Security Absoluta Series
Summary of Contents for Bentel Security Absoluta Series
- Page 1 This integration guide applies to the Absoluta series of access control panels from Bentel Security. (Test reference: model ABS104 control panel and M-Touch keypad) Overview exacqVision can be integrated with Bentel Absoluta series Control Panels. Configuration controls and real-time feedback have been added into the exacqVision client giving the user control and monitoring capabilities of the system.
- Page 2 Requirements Exacq software requirements • exacqVision client version: 8.4 (or greater) • exacqVision server version: 8.4 (or greater) License requirements • exacqVision license: Professional or Enterprise Bentel requirements or as tested • One of the following Communicators: • Control Panel : ABS104 •...
- Page 3 panel can be established via Ethernet (IP/UDP) or Serial (RS232/RS244). This connection needs to be configured via the keypad (IP address or serial port number) before it is connected to ExacqVision. Configuration – Bentel Absoluta Control Panel With the exacqVision system connected to the control panel (Absoluta) via Ethernet (IP/UDP), use the keypad to configure the security system to communicate with the exacqVision recorder.
- Page 4 Supported controls now appear when you click on the Bentel Absoluta entry under “Add Security Integrations” entry in the configuration tree. • Click on Bentel Security panel (or your chosen “friendly name” for the device). • Arming and Disarming can be performed here with the following options: •...
- Page 5 • Zones can be bypassed. • Areas, as well as Zones (or “Points”) can be renamed within the ExacqVision client. • If a supported IP camera is connected to ExacqVision, you can use Event Linking to trigger video recording, output trigger alarm, and more. NOTE: these features will not be available unless a camera with these features supported is connected and visible to the client.
Need help?
Do you have a question about the Absoluta Series and is the answer not in the manual?
Questions and answers