JRC Alphatron LT-3100 Iridium Installation & Operation Manual page 35

Table of Contents

Advertisement

Additional user information is available in the system and represented as a system text or as an icon
in the status bar. Table 6 is listing the system text and describing the status of the Alphatron LT-3100
Iridium.
System Text
Initializing, please wait... The Alphatron LT-3100 Iridium is starting
Searching for Iridium...
Registering...
Registered
Antenna not connected
Handset not connected
SIM card missing
SIM card locked
SIM card blocked
SIM card error
35 | User Interface (UI)
Description
up. Please wait until the system text is
updated.
The Alphatron LT-3100 Iridium is
searching for the Iridium satellites signal.
Make sure that the LT-3130 Antenna Unit
has free line of sight to the Iridium®
satellites.
The Alphatron LT-3100 Iridium is
registering onto the Iridium® Network.
The Alphatron LT-3100 Iridium is
registered on the Iridium® Network.
The LT-3110 Control Unit and LT-3130
Antenna Unit is not connected via the
coaxial cable. Verify coaxial cable
connections, specifications, and details in
section Antenna on page 29.
The LT-3120 Handset is not connected to
the LT- 3110 Control Unit. Phone calls
cannot be performed from the LT-3120
Handset.
The LT-3110 Control Unit cannot identify
a SIM card in the SIM slot. Check that a
SIM card has been inserted behind the
rubber dust cover on the back side of the
control unit. For further details, see
section SIM card on page 27.
The SIM lock has been enabled by the
user (or SIM lock is default enabled in the
SIM card). Type in the SIM card PIN code.
The SIM lock can be disabled by the user
from the UI display (Menu -> System ->
Security).
The SIM card PIN code has been typed in
incorrect three consecutive times. Type in
the SIM card PUK code to deactivate the
SIM card blocked mode.
The SIM card error might appear, if the
SIM card is detected, but the SIM card
format or data is wrong. Please power
down the LT-3110 Control Unit, verify
correct SIM card re-insert, and re- power
the system again.
System Status
Not ready
Not ready
Not ready
Ready to use
Not ready
(Not ready)
Not ready
Not ready
Not ready
Not ready

Advertisement

Table of Contents
loading

Table of Contents