Happy HCH Series Manual

New Main Program (1.26-1) for HCH/HCS2/HCD2/HCR2 series New Main Program (1.26-1) for HCH/HCS2/HCD2/HCR2 series
New Main Program (1.26-1) for HCH/HCS2/HCD2/HCR2 series New Main Program (1.26-1) for HCH/HCS2/HCD2/HCR2 series
New Main program for HCH/HCS2/HCD2/HCR2 series has been released. New Main program for HCH/HCS2/HCD2/HCR2 series has been released. New Main program for HCH/HCS2/HCD2/HCR2 series has been released. New Main program for HCH/HCS2/HCD2/HCR2 series has been released.
This new program expands function of machine as follows:
Main program Main program 1.26-1 Main program Main program
For installing method into machine, please refer to separate instructions.
From version 1.26-1, From version 1.26-1, there are two Main Programs by size of control panel From version 1.26-1, From version 1.26-1,
Main program for 7 inch touch screen control panel Main program for 7 inch touch screen control panel
Main program for 7 inch touch screen control panel Main program for 7 inch touch screen control panel
Main program for 10.4 inch touch screen control panel Main program for 10.4 inch touch screen control panel Main program for 10.4 inch touch screen control panel Main program for 10.4 inch touch screen control panel
Instruction manual download: Instruction manual download:
Instruction manual download: Instruction manual download:
Instruction Manual for HCH series: HCH_InstE_N722-5
Instruction Manual for HCS2 series: CS2_InstE_N722-14
Instruction Manual for HCD2 series: CD2_InstE_N722-12
Instruction Manual for HCR2 series: CR2_InstE_N826-3
1) 1) 1) 1) Support new machine HCR2 series Support new machine HCR2 series Support new machine HCR2 series Support new machine HCR2 series
This program supports new HCR2 series machine.
2) 2) 2) 2) PATTERN SETTINGS can be made without "top" memory position PATTERN SETTINGS can be made without "top" memory position PATTERN SETTINGS can be made without "top" memory position PATTERN SETTINGS can be made without "top" memory position
You can make "PATTERN SETTINGS" at
This allows users to change pattern settings under the condition of pattern in the middle of sewing.
3) 3) 3) 3) Frame movement where you touch in the frame. Frame movement where you touch in the frame. Frame movement where you touch in the frame. Frame movement where you touch in the frame.
You can move the frame position by touching the screen.
This will help you move the frame with less operation.
Touch embroidery area you would like frame to move. Frame moves to where you touch.
1.26-1(common for HCH/HCS2/HCD2/HCR2 series) 1.26-1 1.26-1 (common for HCH/HCS2/HCD2/HCR2 series) (common for HCH/HCS2/HCD2/HCR2 series) (common for HCH/HCS2/HCD2/HCR2 series)
two Main Programs by size of control panel such as: two Main Programs by size of control panel two Main Programs by size of control panel
・
Page 1/2
without pattern at "top" memory position.
This indicates that the machine is ready
to start sewing from "top" (beginning of)
memory position of the pattern.
2013.09.06