Troubleshooting - URBANGLIDE RIDE 80XL Translation Of The Original Notice

Problem
The battery is not charged.
It does not
work
Connections or cables are
The battery needs to be
It does not
work
continuously
It suddenly
stopped
working
The brakes are not properly
It is moving
slowly

TROUBLESHOOTING

Possible cause
disconnected.
charged.
The battery is not fully
charged.
Overload, cut-off
Fuse burnt
adjusted.
It has overloaded
Bad driving condition.
The tires / wheels are
damaged.
Solution
Charge the battery, check if the red light is
Check that the battery is firmly seated in
the product.
Charge the battery, check if the red light is
Make sure the power cable is well
connected.
The battery may need to be replaced.
Overloading may result in product failure.
Turn off the product, wait 15 seconds,
then turn it on again.
Overloading can burn fuses, you may have
to replace them. For this, contact the
after-sales service.
Prior to this, check the condition of all
cables and connectors.
Check the condition of the brakes, and try
to loosen. If this does not work, please
contact the after-sales service.
Check that the user weighs less than the
previously recommended weight.
Check that there are no objects
obstructing the proper operation of the
product.
Make sure you are on flat, dry, and
constant ground.
Check the condition of the wheels of the
product.
8
on.
on.