FKG Rooter S Quick Start Instructions

Golden rules
• Before using Rooter S directly after purchase, make
sure the battery is fully charged.
• Before using directly after purchase, it is important to
calibrate the instrument. Please refer to the calibration
procedure on the back of this present document.
• Make sure the Rooter S is turned off before inserting
or removing files. Furthermore never insert or remove
files without holding down the file release or insertion
switch, this will damage the chuck.
• FKG instruments are used in continuous rotation and
do not require the OTR function.
Programming protocol
The factory settings can be changed according to your
wishes and/or according to the FKG instrumentation
table (see overleaf). To do this, please use the following
programming protocol:
1. Press the Main switch
standby display will appear.
2. Select memory number (for example M6): press Plus
or Minus switch .
3. Changing a parameter of a primary function (speed,
torque, rotation mode):
a. Press the Select switch
primary functions. By pressing several times, you
will display the primary functions.
b. Press the Plus or Minus switch
desired setting.
4. Changing a sub-setting of the same memory number:
a. Hold down the Select switch
second.
b. Press the Select switch
sub-settings.
c. Change the setting; press the Plus or Minus switch
.
5. Changing a parameter of an optional setting (volume,
right or left handed display, return to standby time,...):
a. Hold down Select switch
switch .
b. Press the Select switch
settings.
c. Press the Plus or Minus switches
the setting.
d. Press the Main switch
display.
Rooter S
Quick start instructions
to turn Rooter S on. The
to choose one of the
to change the
for at least 1
to display the various
and then press the
to select one of the
to change
to return to the standby
Main switch
LCD display -
Standby display
1
4
2
3 5
Memory Number
1
Rotation Mode
2
Battery Power
3
Speed Setting
4
Torque Reverse Setting
5
Turn power on:
Turn power off:
File release
or insertion
switch
Select
Switch
Plus or Minus
Switch
+