Adjusting The Throttle Cable; Harness - Stihl SR 430 Instruction Manual

English
Use the retainer (4) to secure the
N
hose and throttle cable, and
metering unit's operating cable on
the SR 450, to the 6th pleat (arrow)
on the pleated hose.
12

Adjusting the Throttle Cable

It may be necessary to correct the
4
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
Set throttle trigger to the full throttle
N
position – as far as stop.
Carefully rotate the screw in the
N
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another full turn.

Harness

Adjusting the Harness
Pull the ends of the straps
N
downwards to tighten the harness.
Adjust the harness so that the
N
backplate fits snugly and securely
against your back.
Loosening the Harness
Lift the tabs of the sliding adjusters.
N
SR 430, SR 450