Right Side; Rear Side - Panasonic AK-SHB800G Operating Instructions Manual

Right side

1 Handle fitting
2 < > mark
Indicates the imaging plane inside the camera.

Rear side

AK-SHB800G
1
2
1
2
3
1 <OPT IN> terminal
Connect to the <OPT OUT> terminal on the IPU using an optical fiber cable.
NOTE
@
t There is a protective cap on the terminal. Remove it before use.
2 <OPT OUT> terminal
Connect to the <OPT IN> terminal on the IPU using an optical fiber cable.
@ NOTE
t There is a protective cap on the terminal. Remove it before use.
3 <DC IN> terminal
This is an input terminal for the external DC power supply. Connects to the external DC power supply.
(DC 11 V to 17 V)
For details, refer to "Using external DC power supply" (Page 13).
4 <OPT> lamp
This indicates the status of the optical signal reception level on the camera.
When the level is strong: Lights green
When the level is weak: Lights yellow
When there is no reception: Off
1
4 5
AK-SHB800PS
10
Operating Instructions
2
Φ
6
7
Description of parts
8
9
39