Kenwood NX-3220 K Service Manual page 141

Item Condition
Panel tuning
mode
16. 1) Adj item:
Battery [BATT]
Warning Adjust:[****]
writing BATT terminal
voltage: 6.2V
while
transmitting.
17. [Panel test
Battery mode]
Warning 1) CH-Sig: 1-1
check BATT terminal
voltage: 6.0V
while
transmitting.
Measurement
PC test mode Test-
equipment
1) Adj item: Power
[Battery Warning] meter
BATT terminal DVM
voltage: 6.2V
while
transmitting.
[Panel test mode]
1) Test Channel
Channel: 1
Test Signaling
Type: Analog
Signaling: 1
BATT terminal
voltage: 6.0V
while
transmitting.
Unit Terminal Unit Parts
Panel ANT
BATT
terminal
Adjustment Specifications
Method
[Panel tuning mode]
PTT: ON
Press [ ] button to
store the adjustment
value.
[PC test mode]
1) Press [Transmit]
button.
2) Press [Acquire
Monitored Value]
button.
3) Press [Apply] button
to store the
adjustment value.
Confirm that one
predetermined
numeric in the range
1 to 256 appears.
Check The
transceiver
can transmit
with causing
the LED to
blink.
(No.RA053<Rev.001>)1-141
/Remarks