Using - Romus DARK WARRIOR User Manual

Using

Before starting work, carry out the crush-prevention safety test:
1 Press the reverse activation button (4)
2 Engage the red handle (3)
3 Release the activation button (4) and press the crush-prevention sensor (5) while the
machine is reversing; it should immediately start to move forward until the red handle (3) is released.
In case of malfunction, do not use the machine and contact your dealer.
Control panel:
The blade starts automatically when the start button (1) is pressed and stops when the stop button
(2) is pressed.
Forward self-propulsion starts when the red handle (3) is engaged and stops when it is released.
Reverse self-propulsion starts when the reverse activation button (4) is held down while the red
handle (3) is engaged simultaneously. The button can then be released. The machine reverses while
the red handle (3) is engaged and stops when it is released.
The crush-prevention safety device is only operational when the machine is moving backwards. If the
operator or an object comes into contact with the crush-prevention sensors (5), the machine
immediately starts moving forward while the red handle (3) is engaged.
E6