AMX RADIA RE-DM4 Operation/Reference Manual page 75

FIG. 88 Curve D at 240 VAC
FIG. 89 shows the output voltage of a dimmer. Curve D is an alternate version of Curve A. It rolls off the
high end slower and extends the dimming range in the middle with a sharp roll off starting at 25%
dimming level.
FIG. 89
Curve D Voltage output in Volts RMS
FIG. 90 shows the output voltage of the RDM-HDC module. Curve D is a variation of Curve A but at a
10% reduction. This curve can be used with 0-10 VDC dimming ballasts using the proper low-end
cutoff.
FIG. 90 Curve D Voltage output in volts DC
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
Relay turn on level = 1%
Dimming Range = 0 - 115 VAC
Appendix A: AMX Lighting Curves
69