AMX RADIA RE-DM4 Operation/Reference Manual page 41

To modify an existing preset:
1. In the Device Configuration page, scroll down to the preset to be modified.
2. For more information on the preset, click the Info button for the preset. This opens a new
information box with the preset's dimmer and level information. When finished, close the box.
3. In the Label field, change the preset's label if necessary.
4. Select the Preset Time by either moving the slidebar or entering the preset time (1-255) in the field
to the right of the slidebar. If you enter a preset time number higher than 255, the slidebar will move
to the "Max" position.
5. To configure the preset, click the preset's Configure button to open the Preset Configuration page
(FIG. 34). When finished, click the Accept button at the bottom of the page and return to the Device
Configuration page. To return to the Device Configuration page without saving any changes, click
the Cancel button.
FIG. 34 Preset Configuration Page
6. To save your changes, click the Accept button at the bottom of the Device Configuration page.
You do not need to click the Accept button to save changes if you only adjusted the
dimmer levels by using the Level slidebar. To exit a Radia configuration page, you
must choose Cancel, whether you have chosen to accept the changes or not.
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
Radia Lighting System Configuration Pages
35