Glow Fire Uranus Assembly Instructions Manual page 14

You will need the following tools (not included): Phillips screwdriver, beam locator, spirit
level, drill, 1/4" wood drill, hammer.
Parts and Hardware
A- heating fireplace
E – Wall bracket
(attached to the back of the
fireplace)
Installation and assembly
Your device is a wall mounted device. Choose a suitable place that is not susceptible to
moisture and away from curtains, furniture and passageways. NOTE: Comply with all
national and regional electrical codes.
Minimum distance from flammable objects
Measurements are made from glass front
Top
Top
Bottom
Pages
Rear
Minimum distances from the mantelpiece
WARNING
WHEN USING PAINT OR VARNISH ON THE MANTELPIECE, PAINT OR VARNISH MUST
BE HEAT-RESISTANT TO PREVENT DISCOLORATION.
14
B – Wood screws
Remote control
G – Jewelry quartzes
39.4" (1000mm) zum Kaminsims
39.4" (1000mm) zur Decke
0"
0"
0"
Glow Fire Uranus
C – Dry wall plugs
Instruction manual
Stand: 09/2020
Version: 1