Prem-I-Air EH1896 Manual page 6

Delay start timer
The unit can be set to switch on after a period of time and remain on for a set period
of time. This function can only be programmed through the remote control.
1. With the unit in standby mode press
I/W light will illuminate. Use
delay the start for.
2. Press
many hours you wish the unit to run for.
Weekly Timer
The weekly timer can only be programmed through the remote control. The timer
is controlled by setting the "Switch ON" and "Switch OFF" times the heater will
operate. The following steps 1-5 must be completed together to set an operating
window
To set the ON time:
1. SET DAY: press
to choose the day to program.
2. SET HOUR: Press
start hour.
3. SET MINUTE: Press
set the start minute.
to set the OFF time:
4. SET HOUR: press
hour.
5. SET MINUTE: press
off minute.
Note: the above timed operating window instructions are for 1 period in 1 day, to
set another period on another day, please follow steps 1-5 again and choose the
day and times accordingly.
again and the II/H light will illuminate. Use
once, I/W and W-TIMER light will illuminate, use
again, II/H light will illuminate. Use
again, FAN/M light will illuminate, use
again, II/H will illuminate, use
again, FAN/M will illuminate, use
then
to set the hours (01-24) you wish to
6
and the delay light and
to set how
to set the
to set the off
to set the
to