Advertisement
wood, reducing the waste, and lowering the cost to you.
Plastics
The cowl and wing fairing are accurately reproduced high quality Polystyrene, the canopy is made
from PETG
General Building Information
The F9F-6 Cougar can be built by a person with building skills. It is designed for someone who has
built a low wing warbird. No unusual building techniques are required, although more difficult areas
are explained in detail where necessary. Certain steps in the building process must be followed as
depicted, or you might find yourself digging back into the structure to redo something. These areas are
outlined when necessary. Occasionally hints will be included at certain building steps. These are not
required for completion, rather they are tips intended to ease a particular process. The cnc router does
cut through the wood, As a result of this, occasionally there will be fraying on the surface of the wood.
This is normal, and is only a surface problem and does not affect the wood in any other way. Similarly,
the cnc settings are optimized for wood thickness averages, so occasionally, due to variations even in
individual sheets, some areas might not cut through completely. Simply use care in cutting the parts
from the sheets; most of the time, the parts will break out of the sheets!
Hardware and a fan unit are not included in the kit. There are so many choices for quality hardware
that these choices are left to the individual preferences of the builder, rather than include something
in the kit that you'll probably throw away anyway.
This aircraft is not a toy. It must be flown in a responsible manner according to the rules set forth by
Law. The builder assumes the responsibility for the proper assembly and operation of this product.
Rbckits shall have no liability whatsoever, implied or expressed, arising out of the intentional or
unintentional neglect, misuse, abuse, or abnormal usage of this product. Rbckits shall have no liability
whatsoever arising from the improper or wrongful assembly of the product nor shall it have any
liability due to the improper or wrongful use of the assembled product. Rbckits shall have no liability
for any and all additions, alterations, and modifications of this product.
Having said that, turn the page and start building the best airplane kits on the market!
Material you might need:
Balsa knife, Stanley knife, straightedge, building board 1500mm
ca glue medium, thin, thick you need approx. 6 bottles, building nails, tape
Or use white glue, and canopy glue, epoxy for the canopy and cowls
Some drilling and bending tools, wire cutter, safety goggles etc. etc.
For finishing you need:
glass 25 gram 3mtr and filler dope 1 litre, brushes sanding paper, paint of your choice
Wheels as on the drawing, controls, motor,edf unit, battery etc.
Advertisement
