Inserting Batteries - Sony HVL-F28RM Help Manual

Help Guide
Flash
HVL-F28RM

Inserting batteries

This flash unit can accommodate either set of the following:
Two AA-size alkaline batteries
Two AA-size rechargeable nickel-metal hydride (Ni-MH) batteries
Note
Before you use the rechargeable nickel-metal hydride batteries, be sure to fully charge the batteries with the specified battery charger.
Do not use lithium-ion batteries in this flash unit as they may prevent the flash unit from delivering full performance.
Slide open the battery chamber door following the steps indicated in the following illustration.
1
Insert the batteries into the battery chamber as illustrated (
2
Close the battery chamber door.
3
Perform the step 1 operations in reverse order.
5-023-112-11(1) Copyright 2020 Sony Corporation
7
). ( indicate the direction of the batteries.)