Sony HVL-F28RM Help Manual page 41

Help Guide
Flash
HVL-F28RM
Tips for the customers using a camera without external flash setting capabilities
When this flash unit is attached to a camera without external flash setting capabilities, the following operations are available:
Changing the flash compensation value
Configuring the flash unit as the commander or receiver unit
Pairing the commander unit with the receiver unit
Firing test flashes
Resetting the flash firing settings to the factory defaults
Restoring the factory default state of the flash unit
Note
It is recommended that you reset the flash firing settings to the factory defaults before performing TTL flash photography.
The settings of this flash unit are retained when it is attached to a camera without external flash setting capabilities as well.
While this flash unit is removed from a camera, you cannot view the firmware version.
Related Topic
TTL flash photography (TTL)
Firing test flashes
Configuring the flash unit for wireless flash photography
Pairing with a radio wireless commander/receiver (for radio wireless flash photography)
Resetting the flash firing settings to the factory defaults
Restoring the factory default state of the flash unit
5-023-112-11(1) Copyright 2020 Sony Corporation
41