Preparations; Inserting Batteries - Sony HVL-F60RM Operating Instructions Manual

Preparations

Inserting batteries

The flash unit can accommodate
either set of the following:
• Four AA-size alkaline batteries
• Four AA-size rechargeable
nickel-metal hydride (Ni-MH)
batteries
Before you use the rechargeable
nickel-metal hydride batteries, be
sure to fully charge the batteries
with the specified battery charger.
Do not use lithium-ion batteries in
this flash unit as they may prevent
the flash unit from delivering full
performance.
No batteries are supplied with the
flash unit.
1
Press and hold the release
button (  ), and then slide
the battery chamber door to
open in the direction of the
arrows (  and  ).
GB
14
2
Insert the batteries into
the battery chamber as
illustrated (
( indicate the direction
of the batteries.)
3
Close the battery chamber
door.
• Perform the step 1 operations
in reverse order.
).