Table of Contents
Advertisement
The information contained herein is general in nature and not intended for specific
application purposes. It does not relieve the user of responsibility to use sound practices
in application, installation, operation, and maintenance of the equipment purchased.
Siemens reserves the right to make changes in the specifications shown herein or
to make improvements at any time without notice or obligations. Should a conflict
arise between the general information contained in this publication and the contents
of drawings or supplementary material or both, the latter shall take precedence.
For the purpose of this manual a qualified person is one who is familiar with the
installation, construction or operation of the equipment and the hazards
involved. In addition, this person has the following qualifications:
(a) is trained and authorized to de-energize, clear, ground, and tag circuits
and equipment in accordance with established safety practices.
(b) is trained in the proper care and use of protective equipment such as rubber
gloves, hard hat, safety glasses or face shields, flash clothing, etc., in accordance
with established safety practices.
(c) is trained in rendering first aid.
These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible
contingency to be met in connection with installation, operation, or maintenance. Should further information be
desired or should particular problems arise which are not covered sufficiently for the purchaser's purposes, the
matter should be referred to the local sales office.
The contents of this instruction manual shall not become part of or modify any prior or existing agreement,
commitment or relationship. The sales contract contains the entire obligation of Siemens Power Transmission &
Distribution
LLC
. The warranty contained in the contract between the parties is the sole warranty of Siemens
Power Transmission & Distribution
the existing warranty.
Courtesy of NationalSwitchgear.com
DANGER
Hazardous voltages and high-speed moving parts.
Will cause death, serious personal injury or equipment
damage.
Always de-energize and ground the equipment before
maintenance. Read and understand this instruction
manual before using equipment. Maintenance should
be performed only by qualified personnel. The use of
unauthorized parts in the repair of the equipment or
tampering by unqualified personnel will result in dan-
gerous conditions which will cause severe personal
injury or equipment damage. Follow all safety instruc-
tions contained herein.
IMPORTANT
QUALIFIED PERSON
NOTE
LLC
. Any statements contained herein do not create new warranties or modify
Advertisement
Table of Contents
