Installation Practice - Ice-O-Matic Gourmet UCG Series Installation And Service Manual

10. Has the owner/user been given the Installation and Service Manual and been instructed on
the importance of periodic maintenance checks?
11. Has the unit been registered for warranty? Check for correct model and serial number against
the serial plate.
12. Has the owner been given the name and the phone number of the authorized Ice-O-Matic
Service Agency serving him/her?
G.

INSTALLATION PRACTICE

WARNING: This icemaker is not designed for outdoor installation and will not function in
ambient temperatures below 50˚F (10˚C) and above 100˚F (40˚C). This ice maker will
malfunction with water temperatures below 40˚F (5˚C) or above 90˚F (35˚C).
OPERATING INSTRUCTIONS
START UP
After having correctly installed the ice maker and completed the plumbing and electrical connections,
perform the following "start-up" procedure.
A.
Plug in the ice maker. Unit will start up in charging cycle mode.
NOTE: Every time the unit returns under power, after having been switched off,
the water inlet valve, the hot gas valve, and the water drain valve get energized
for a period of 5 minutes, allowing water to the machine sump reservoir to fill up
and to wash off any dirt that has been deposited. (Fig. 1.)
UCG GOURMET SERIES UNDERCOUNTER
pg. 6