LG LS-B0760CM/B0760HM Service Manual page 31

7. Indoor unit installation.
• Hook the indoor unit onto the upper portion of
installation plate. (Engage the two hooks of the
rear top of the indor unit with the upper edge of
the installation plate.)
Ensure the hooks are properly seated on the
installation plate by moving it in left and right.
8. Connecting the pipings to the indoor unit.
• Align the center of the pipings and sufficiently
tighten the flare nut with fingers.
• Finally, tightening the flare nut with torque wrench
until the wrench clicks.
Wrench tightening the flare nut with torque
wrench, ensure the direction for tightening follows
the arrows on the wrench.
Pipe Size
Liquid Side (1/4")
Gas Side (3/8")
Gas Side (1/2")
9. Wrap the insulation material around the con-
necting portion.
Press the lower left and right side of the unit against the
Installation Plate until the hooks engages with their slots
(sound click).
Torque
1.8kg.m
4.2kg.m
5.5kg.m
- 31 -
Indoor unit tubing
Spanner
Plastic Bands
Wrap the insulation material around the connecting
portion.
Connecting cable
Drain hose
Pipings
Flare nut
Torque wrench
Instulation material