AMX MVP-7500 Quick Start Manual page 2

Unsecuring the MVP panel from the MVP-KS
1. Place a soft cloth onto a level surface.
2. Carefully place the MVP panel atop the cloth in order not to scratch
the panel during the removal process.
3. Pull upwards on the MVP latch release lever (located below the
kickstand's AMX logo) to release the "grip" on the MVP's metallic
plate (FIG. 5).
MVP latch
release lever
FIG. 5
Releasing the MVP from the MVP-KS
4. Pull off the MVP-KS from the back of the MVP panel.
5. Carefully grasp both sides of the MVP panel and rotate the entire unit
over back onto the level surface.
AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
Rubber gripping
strip
036-004-2771 5/05 ©2005
AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation.
REV: D
93-5965-12