Lavor FF45 User's Manual & Operating Instructions page 6

- Remove the heater and all packaging
materials from the shipping carton.
Tip: Be sure to remove the axle from the
side of the Styrofoam packaging.
50mm Screws (4)
© 2020, Lavorwash
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
Assembly Instructions
Models: FF125 / FF175 / FF215
Wheels (2)
Front Handle
Tools Needed:
- Phillips Head Screw Driver
- 8 mm open end wrench
- 19 mm open end wrench
Tip: Use a power screwdriver and
locking wrench for easier assembly.
What's In The Box
30mm Screws (4)
Axle Nuts (2)
Wheel Support Frame
Kerosene Forced Air Heater User's Manual
5
8mm Nuts (8)
Spacers (2)
Rear Handle
Axle