Lavor FF45 User's Manual & Operating Instructions page 5

- Remove the heater and all packaging materials
from the shipping carton
Cord Wraps (2)
Carry Handle Assembly
1. Align holes in the upper housing with the 2
holes in the handle as shown in Figure 3.
2. Insert screws and tighten firmly.
Figure 3
© 2020, Lavorwash
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
Assembly Instructions
Models: FF45 / FF70
What's In The Box
Carry Handle (1)
4
Note: Save the box and packaging materials
for future storage.
Black Screws (2); White Screws (2)
Cord Wrap Assembly
1. Insert tabs into square slots in shell support
and line up screw holes as shown in Figure 4.
2. Insert screws and tighten firmly.
Tools Needed:
- Phillips Head Screw Driver
Figure 4
Kerosene Forced Air Heater User's Manual