PVB Series Powerlite International Net System Instructions
6
Assembly
WARNING: Uprights are heavy. Do not attempt to lift or install without assistance.
1. Install each upright into the ground sleeves.
2. Follow instructions included with winch to set the winch clamp to the correct
upright diameter (3-1/2").
3. Install winch to one upright using the socket cap screws and flat washers supplied
with the winch (Figure 6-1, item 2 & item 4).
4. Fasten the clamp together using the cap screws supplied with the winch (Figure
6-1, item 3-1).
Figure 6-1: Winch installation.
- 6 of 9-
JSL-Inst041
www.jayprosports.com