About This Documentation; Validity Of The Documentation; Required And Supplementary Documentation - Bosch Rexroth 11 Series Instruction Manual

Table 1: Required and supplementary documentation
Title
Order confirmation
Contains the order-related technical data for your axial piston variable pump
A15VSO/A15VLO.
Installation drawing
Contains the outer dimensions, all ports and the hydraulic circuit diagram for your
axial piston variable pump A15VSO/A15VLO.
Axial piston variable pump A15VSO/A15VLO
Contains the permissible technical data, ports, main dimensions and circuit
diagrams.
Hydraulic fluids based on mineral oils and related hydrocarbons
Describes the requirements for hydraulic fluids on mineral oil basis and related
hydrocarbons for operation with Rexroth hydraulic components, and provides
support for selection of suitable hydraulic fluids for the hydraulic system.
Environmentally acceptable hydraulic fluids
Describes the requirements for environmentally acceptable hydraulic fluids
on mineral oil basis and related hydrocarbons for operation with Rexroth hydraulic
components, and provides support for selection of suitable hydraulic fluids for the
hydraulic system.
Fire-resistant, water-free hydraulic fluids (HFDR/HFDU)
Describes the requirements on fire-resistant, water-free hydraulic fluids
(HFDR/HFDU) for operation with Rexroth hydraulic components and assists you
in selecting a hydraulic fluid for your hydraulic system.
Bosch Rexroth Fluid Rating List for Rexroth hydraulic components (pumps and
motors)
Contains the hydraulic fluids positively evaluated by Bosch Rexroth
Information on the use of hydrostatic drives at low temperatures
Contains additional information on the use of Rexroth axial piston units at low
temperatures.
Storage and preservation of axial piston units
Contains additional information on storage and preservation.

1 About this documentation

1.1 Validity of the documentation
This documentation is valid for the following products:
• Axial piston variable pump A15VSO/A15VLO Series 11
This documentation is intended for machine/system manufacturers, assemblers and
service engineers.
This documentation contains important information on the safe and proper
transport, installation, commissioning, operation, maintenance, removal and simple
troubleshooting of the axial piston unit.
▶ Read this documentation completely, in particular chapter 2 "Safety instructions"
on page 8 and chapter 3 "General instructions on property damage and
product damage" on page 14 before you start work with the axial piston unit.

1.2 Required and supplementary documentation

▶ Only commission the axial piston unit if the documentation marked with the book
symbol is available to you and you have understood and observed it.
About this documentation
Document number
–
Please request the
installation drawing
from your contact
at Bosch Rexroth.
92801
90220
90221
90222
90245
90300-03-B
90312
RE 92801-01-B/11.2018, A15VSO/A15VLO Series 11, Bosch Rexroth AG
5/60
Document type
Order confirmation
Installation drawing
Data sheet
Data sheet
Data sheet
Data sheet
Data sheet
Manual
Data sheet