About This Documentation; Validity Of The Documentation; Required And Supplementary Documentation - Bosch rexroth 1 Series Instruction Manual

Table 1: Required and supplementary documentation
Title
Order confirmation
Contains the order-related technical data for your axial piston variable
double pump A20V(L)O.
Installation drawing
Contains the outer dimensions, all connections and the hydraulic circuit diagram
for your A20V(L)O axial piston variable double pump.
Axial piston variable double pump A20VO
Contains the permissible technical data, ports, main dimensions and
circuit diagrams.
Axial Piston variable Pump A10VO
Contains additional technical data for size 60.
Axial piston variable pump A11VO
Contains additional technical data for sizes 95 to 260.
Axial piston variable pump A4VSO
Contains additional technical data for size 500 (size 520 not included in the
standard program).
Control systems HM, HS, HS5 and EO
Contains all control systems for size 520.
Hydraulic fluids based on mineral oils and related hydrocarbons
Describes the requirements for hydraulic fluids on mineral oil basis and related
hydrocarbons for operation with Rexroth hydraulic components, and provides
support for selection of suitable hydraulic fluids for the hydraulic system.

1 About this documentation

1.1 Validity of the documentation
This documentation is valid for the following product:
• Axial piston variable double pump A20V(L)O (series 1)
The axial piston variable double pump consists of tried and tested components of
the following variable pumps:
• Axial piston variable pump A10VO (series 52, size 60)
• Axial piston variable pump A11VO (series 10, size 95)
• Axial piston variable pump A11VLO (series 11, sizes 190 and 260)
• Axial piston variable pump A4VSO (series 30, size 520)
This documentation is intended for machine/system manufacturers, assemblers and
service engineers.
This documentation contains important information on the safe and proper
transport, installation, commissioning, operation, maintenance, removal and simple
troubleshooting of the axial piston unit.
▶ Read this documentation completely, in particular chapter 2 "Safety instructions"
on page 9 and chapter 3 "General instructions on property damage and
product damage" on page 16 before you start work with the axial piston unit.

1.2 Required and supplementary documentation

▶ Only commission the axial piston unit if the documentation marked with the book
symbol is available to you and you have understood and observed it.
About this documentation
Document number
–
Please request
the installation
drawing from
your contact
at Bosch Rexroth.
93100
92703
92500
92050
92076
90220
RE 93100-01-B/2019-09-10, A20V(L)O Series 1, Bosch Rexroth AG
5/68
Document type
Order confirmation
Installation drawing