Remote Control; Maintenance; Technical Assistance - S&P ARTIC-405 CN TC Manual

TIMER ON
Using the control buttons on the timer, it is possible to program the fan starts auto-
matically after 1h-9h.

REMOTE CONTROL

• Insert the 2 batteries type AAA in the remote control. (not included)
• Maximum distance to the receiver up to about 3 meters provided no there are no obstacles
in the way that could distort the signal.
• Pls handle with care do not expose to humidity or a long time periods in direct sunlight.
INCLINACIÓN DEL CABEZAL
The ARTIC-CN fans have a multi-swinging head. To lean it you only have to press over the fan
adjusting it to the desired angle (Fig. 3).

MAINTENANCE

Before beginning any cleaning or maintenance operation on the appliance unplug it
from the mains supply.
The ARTIC-CN fans do not need any special maintenance. To take out the propeller, you must
follow the fitting instructions in reverse order. The propeller can be cleaned using warm water
with a small quantity of a mild detergent. Clean the outside of the fan with a moistened cloth.
Do not sink the fan. Do not use neither abrasive products nor solvents. Before mounting it
again, be sure that all the components are completely dry.
Important: Make sure the fan is disconnected from power supply before removing the protection.

TECHNICAL ASSISTANCE

S&P's large Technical Service network will guarantee adequate technical assistance.
If a fault is observed in the unit, please contact any of the mentioned technical service offices
and they will attend to your problem.
Any manipulation of the appliance by personnel not belonging to the Official S&P Services will
result in your guarantee being void.
For any queries regarding S&P products please contact any branch of our After Sales Service
network if you are in Spain, or your regular dealer in the rest of the world. To find your nearest
dealer, visit our website at www.solerpalau.com
Operating example
7 hours after programming, the fan always
starts automatically at the defined speed and with oscillation.
10