Followers Guides - ITI HOLELESS Installation Manual

SOLUTIONS
in motions
Follower guides provide an additional safety method to prevent buckling of the jack. Its assembly procedure is as
follows.
1. Align the cylinder using the information shown previously
2. Install a follower guide on the head of the second biggest section of the jack
3. Repeat the same step for all sections with a smaller diameter
4. Install the car on the jack
5. Install a pair of shoes on each bracket
6. Install brackets on both sides of the follower guides
7. Run the jack up and down a few times
8. Make adjustments, if necessary
10
Holeless telescopic jack
Followers guides