Operating the Choke
Use the choke to start a cold engine.
1.
Pull up the choke knob to engage the choke
before using the key switch
2.
Push down the choke knob to disengage the
choke after the engine has started
Figure 20
1. O
position
N
(Figure
20).
(Figure
20).
g008959
2. O
position
FF
Starting the Engine
Note:
A warm or hot engine may not require choking.
Important:
Do not engage the starter for more
than 5 seconds at a time. Engaging the starter
motor for more than 5 seconds can damage the
starter motor. If the engine fails to start, wait 10
seconds before operating the engine starter again.
21
Figure 21
g227548