Page 1
Understand manual before use. Operation of this device without understanding the manual and WARNING receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/serial- number. This equipment is intended for use by trained and qualified emergency services personnel for firefighting.
Page 2
TABLE OF CONTENTS 1.0 MEANING OF SAFETY SIGNAL WORDS 2.0 SAFETY 3.0 GENERAL INFORMATION 4.0 FOAM TYPE, CONCENTRATION, AND PROPORTIONING 5.0 ATTACHMENT TO THE NOZZLE 6.0 USE OF FOAM ATTACHMENTS 6.1 LX FOAMJET 6.2 MX FOAMJET 7.0 USING FOAM 8.0 WARRANTY 9.0 MAINTENANCE 9.1 FIELD LUBRICATION 9.2 SERVICE TESTING...
The foam attachments are quickly attached or removed from the nozzle as the situation demands. The attachments are available for a variety of TFT hand held & master stream nozzles. See the following pages for a listing of available models and compatible nozzles.
Page 4
Series FOAMJET Low Expansion Aspirating Attachment Description Model FJ-DQ FJ-GD FJ-U FJ-HM FJ-H 1” QuadraFog 1” G-Force Ultimatic Mid-Matic Handline For Nozzle Series 5 - 40 GPM 10 - 100 GPM 10 - 125 GPM Mid-Force 95 - 300 GPM (Flow Range) 5 - 60 GPM Metro 1...
Page 5
Series MX FOAMJET Multi-Expansion Foam Aspirating Attachment Description Model FJ-MX-D Twister 1” For Nozzle Series 10 - 24 GPM (Flow Range) 10 - 40 GPM Attachment Method LOCKED UNLOCKED Insert bumper into attachment with ring unlocked. Foam Application Use in Straight Stream through Fog Pattern FOG: Shorter Reach...
Page 6
MX FOAMJET Series Multi-Expansion Foam Aspirating Attachment Description Model FJ-MX-F FJ-MX-DQ FJ-UMX FJ-MX-FQ FJ-MX-FT FJ-MX-HM FJ-MX-G FJ-HMX 1.5” Twister 1” Quadrafog Ultimatic 1.5” Thunderfog Mid-Matic 1.5” G-Force Handline For Nozzle Series 20-60 GPM 5-40 GPM 10-125 GPM Quadrafog Series Mid-Force 30-150 GPM 95-300 GPM (Flow Range)
Page 7
Series FOAMJET-LX Low Expansion Foam Aspirating Attachment Description Model FJ-LX-U FJ-LX-G FJ-LX-FQ FJ-LX-HM FJ-LX-M FJ-LX-M2 Ultimatic 1.5” G-Force 1.5” Quadrafog Mid-Matic Master Stream M-F* series For Nozzle Series 10-125 GPM 30-150 GPM 30-125 GPM Mid-Force 1000, 1250S Master Stream (Flow Range) nozzles Metro 1 Metro 0...
Page 8
Series MX FOAMJET Low Expansion Foam Aspirating Attachment Description Model FJ-MX-MD MD Series: 100-500 GPM (Max-Force, Max-Matic, Max-Flow) For Nozzle Series ZN Series: 350, 500 & 750 GPM Industrial Nozzle (Flow Range) Attachment Method UNLOCKED LOCKED Push levers down Insert bumper with latch unlocked.
46383-9327 USA, within a reasonable time after discovery of the defect. TFT will examine the equipment. If TFT determines that there is a defect attributable to it, TFT will correct the problem within a reasonable time. If the equipment is covered by this limited warranty, TFT will assume the expenses of repair.
Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability for damage to equipment or injury to personnel that is a result of user service. Contact the factory or visit the web site at tft.com for parts lists, exploded views, test procedures and troubleshooting guides.
Need help?
Do you have a question about the MX-FoamJet and is the answer not in the manual?
Questions and answers