Fig. 6-10:Addressing The Machine Function Keys As From Interface 21Vrs; Fig. 6-11:Io Editor Of The Programming Interface 21Vrs - Bosch Rexroth Indramat BTV30.2 Project Planning Manual

BTV30.2
DOK-MTC200-BTV30.2****-PR02-EN-P
On interface 21VRS
As from software version 21VRS a logical number has to be assigned to
each device as well as to all machine function keys. Use the IO editor of
the programming interface to assign to the numbers (see Fig. 6-11).
Depending on the application the device number can be different. For this
reason, the succeeding table is marked with a star (*).
Machine function keys
R1
R2
R3
R4
R5
R6
R7
R8
Fig. 6-10: Addressing the machine function keys as from interface 21VRS
A configuration example of the IO editor is shown in the following picture.
Fig. 6-11: IO editor of the programming interface 21VRS
Front Panel, Keyboard
Address
%I*.1.0
%I*.1.1
%I*.1.2
%I*.1.3
%I*.1.4
%I*.1.5
%I*.1.6
%I*.1.7
6-7
IO_Editor.bmp