Summary of Contents for Happybeds Emily 4ft Metal Bed
Page 1
DO NOT jump on the product or any of its parts. DO NOT use this product if any parts are missing, damaged or worn. DO NOT use this product unless all fixings are secured. Please keep these instructions for future reference. www.happybeds.co.uk...
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Birlea Vendor: S000053 Suppliers of Inspiration ASSEMBLY INSTRUCTIONS EMILY 4'6" BED IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR EMILY 4'6" BED FRAME. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. HEALTH & SAFETY : DO NOT jump on this bed frame. DO NOT use this bed frame if any parts are missing, damaged or worn.
Page 4
Vendor: S000053 Part List Hardware List (found in box 1) Part Description Part Description Headend M6 x 16mm JCBC Screw Footend M6 x 50mm JCBC Screw Side Support M6 Nut Side Frame M6 x 35mm JCBC Screw Mid Support Double Slat Cap Base Leg Single Slat Cap Slat...
Page 5
Vendor: S000053 Step 2: Place the Side Frames (4) underneath the Side Supports (3) and secure using hardware parts (B) and (C). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Small Allen Key ON TOP Step 3: Place the Mid Supports (5)
Page 6
Vendor: S000053 Step 5: Push hardware parts (E) into the Mid Support (5) then place hardware part (F) onto each Slat (7). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 6: Slide the Slats (7) into hardware part (E) on the Mid Support (5) then push the ends into the Side Supports (3) firmly, insert hardware part (G) to the frame posts.
Page 7
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...