Set Date & Time; Default Settings - HP F230 User Manual

2.6 Set Date & Time
Before using the device, we recommend you set the correct date and time:
1. If the device is recording, short press
the 'REC' button (5) to stop and enter
Standby Mode.
2. Press the 'M' button (7) twice to enter
the General Settings menu.
3. Press the 'Up' and 'Down' buttons
(8 & 9) to select Date/Time and press
'REC' button (5) to confirm.
4. Press the 'Up' and 'Down' buttons
(8 & 9) to adjust the value and then
press 'REC' button (5) to confirm and
move to the next field.
5. With all fields correct, press the 'M' button (7) to save and exit the menu.
WARNING:
Date/Time settings may automatically reset themselves if the battery is allowed to
completely drain.

2.7 Default Settings

Please find below the full list of Default Settings for this camcorder:
Default Settings
Resolution
Loop Recording
Motion Detection
Record Audio
Date Stamp
Vibration Detection
1080P HD
3 mins
OFF
ON
ON
Normal
-8-
Key Tone
Language
Frequency
Screen Saver
ON
English
60 Hz
3 mins