Connecting To Power; Powering The Camcorder - HP F230 User Manual

2.4 Connecting to Power

Use only the supplier car adapter to power the camcorder and charge the built-in
battery.
1. Plug one end of the car charger
into the USB Connector of the
camcorder.
2. Plug the other end into your
vehicles lighter socket.
WARNING:
If the environment reaches 115-degrees Fahrenheit or above, the car adapter may
stop charging the camcorder battery. This is characteristic of a Lithium Polymer
battery and is not a malfunction.

2.5 Powering the Camcorder

Automatic Power
• Once the vehicle engine is switched on, the camcorder automatically powers on.
• When the vehicle engine is switched off, the camcorder will automatically save the
recording and power off within 10 seconds.
Manual Power
• To manually turn power on, short press the Power
Button (4).
• To manually turn the power off, press and hold the
Power Button (4) for 3 seconds.
-7-