Ocean Digital WR-210CB Quick Start Manual

Entering security key of your Router

After the radio is powered up, follow the steps on the display to Add router,
it will start scanning the routers available and display a list after scanning is
done. Choose your router from the list. If your network is enabled with securi-
ty protection, you will be asked to enter the passcode to connect with your
network.
Follow the steps below to enter the passcode on your radio:

Using buttons on the Radio

1. Rotate the Volume/Select knob to browse the numbers/symbols/
characters available, press the <Right > key to enter and move to the
next entry.
Rotate to browse characters
Volume/Select Knob
2. When the last character is entered, press <Volume/Select> to confirm
and it will start associating with your network. Do NOT press the right key
for the last character entry.
3. It will start associating with your network.
Quick Start Guide

Press "Right" key
Volume/Select Knob
Enter Password

A
 MOVE 
Press to confirm
10:10
A
2/2
INPUT:  OK