Table of Contents
Advertisement
Quick Links
Specifications
Operating Voltage: 12 ~ 24 VDC/AC
Current Draw: 280mA/12VDC; 180mA/24VDC
Locking Mode: Fail-Safe
Operating Temperature: -10°C~+49°C
Humidity: 0~85% non-condensing
Applicable to horizontal and vertical installation
For single/double action swing doors
Latch Throw: 16mm
Endurance Rating: 250'000 cycles (Factory tested)
Preload: 500 lbs of pressure strength
ML-400 Series Models
ML-400M: Mortise mount
ML-400MSMB: Surface mount
ML-400MVGL: Surface mount
(for frameless glass doors & walls)
Strike Plate Dimensions
KP-ML-400-A
KP-ML-400-B
Wiring Diagram
ML-400 Electric Lock
Installation Instruction
KP-ML-400-C
KP-ML-450-A
Red: +
12~24VDC/AC
Black: -
Blue: N.O.
Door Status Output:
Green: COM.
1A/125VAC
Yellow: N.C.
Copyright © All Rights Reserved. P-MU-ML-400 Published: 2020.12.07
Mortise Mount Model Dimensions
ML-400M
KP-ML-450-B
Butt Splice (IDC) Connector
Using crimper or pliers and pressing the header
of connector down to even position.
KP-ML-450-C
Unti:mm
Advertisement
Table of Contents
Related Manuals for Gianni ML-400 Series
Summary of Contents for Gianni ML-400 Series
- Page 1 Applicable to horizontal and vertical installation For single/double action swing doors Latch Throw: 16mm Endurance Rating: 250’000 cycles (Factory tested) Preload: 500 lbs of pressure strength ML-400 Series Models ML-400M: Mortise mount ML-400MSMB: Surface mount ML-400MVGL: Surface mount (for frameless glass doors & walls)
- Page 2 Unti:mm Mortise Mount Installation Door Loop (Optional) ø5.2mm ø5.2mm The door loop protects the wiring from damage at the door hinge. Attention! Please ensure that the template is the correct way up ø5.2mm ø5.2mm ø5.2mm ø5.2mm Alignment CL Align the center line (CL) of the lock ø5.2mm ø5.2mm body template with the CL of the door...
- Page 3 Surface Mount Installation Blind Nut M6 x 25 Screw M6 x 25 Screw Blind Nut Unti:mm Glass Mount Model Dimensions ML-400MVGL Copyright All Rights Reserved. P-MU-ML-400 Published: 2020.12.07...
- Page 4 Glass Mount Installation 1.Make sure the installation location and clean the surface of glass. 2.Take off the sticker on the back of the spacer and attach the spacer to glass. Add more spacers if needed according to glass thickness. Use silicon to secure the bracket firmly.
Need help?
Do you have a question about the ML-400 Series and is the answer not in the manual?
Questions and answers