Re-Lamping Instructions; Assembly Diagram - HAMPTON BAY 517-636 Instruction Manual

RE-LAMPING INSTRUCTIONS:

1. Unplug the fixture from the wall outlet.
2. Make sure the lamp body and the bulb(s) is cool enough before touching.
3. Remove the old bulb from socket and insert new bulb into the lamp socket.
CAUTION: Please refer to the re-lamping label on the product for bulb type and
maximum wattage allowed.
Plug the power cord into the wall outlet and turn on the fixture using the switch(s).

ASSEMBLY DIAGRAM:

This manual is suitable for uses with floor lamp and table lamp. The fixture shape may
vary, not shown for all models but the same assembly methods as diagrams.
Part# Description
1 Bulb
2 Fabric shade
3 Socket ring
4 Lamp socket
5 Rotary switch
6 Swing arm
7 Coupler
8 Threaded tube
9 Connector/Base
10 Plug
1
2
3
4
5
7
6
8
7
3
10
9