Storing Service In Preset Memory; Selecting Operation - Kenwood DNX9190DABS Instruction Manual

DAB
Artwork/VU meter
7
• Displays/hides artwork area.
• The picture data is displayed if available from
current content.
• Touch to switch between the artwork and VU
meter.
Function panel
8
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• [TI]: Selects the traffic information mode. For
details, see Traffic Information (P.55).
• [SETUP]: Displays the DAB SETUP screen. For
details, see DAB Setup (P.56).
• [PTY]: Searches for a program by program
type. For details, see Search by program type
(P.54).
• [DLS]: Display the Dynamic Label Segment
screen.
Indicator Items
9
• [DAB]: Digital Radio is being received.
• [RDS]: Radio Data System is being received.
• [MC]: Receiving service is displayed.
White: Primary Component is received.
Orange: Secondary Component is received.
• [TI]: Indicates the reception state of traffic
information.
White: TP is being received.
Orange: TP is not being received.
54
Storing Service in Preset
Memory
You can store the current receiving service in
the memory.
1
Select a service you wish to store in
memory.
2
Touch [
3
Touch [P#] (#:1-15) in which you want to
store the station for 2 seconds until a
beep sounds.

Selecting Operation

Ñ
Search by program type
You can tune in the station broadcasting the
specified type of program when listening to
Digital Radio.
1
Touch [
Touch [PTY].
h PTY Search screen appears.
h
2
Select a program type from the list.
Autogoods "130"
] on the right side of the screen.
] on the left side of the screen.