Initial Settings - Kenwood DNX9190DABS Instruction Manual

Basic Operations

Initial Settings

Initial setup
Perform this setup when you use this unit first
time.
1
Set each item as follows.
■ [Locale]
Select the country for the navigation system.
The language, the distance unit, and the
gasoline unit are set.
1 Touch [Locale].
2 Select the desired country.
■ [Language]
Select the language used for the control
screen and setting items. Default is "British
English(en)".
1 Touch [Language].
2 Touch [Language Select].
3 Select the desired language.
4 Touch [
].
For details, see User Interface Setup
(P.74).
■ [Display]
Set the key illumination color.
If it is hard to see the image on the screen
even, adjust the viewing angle.
1 Touch [Display].
2 Touch [Key Colour].
3 Select the desired color.
4 Touch [
].
10
(DNX9190DABS / DNX7190DABS only)
5 Touch [Display Adjustment].
6 Adjust a viewing angle and a tilt position.
7 Touch [
For details, see Display Adjustment
(P.13).
(DNX5190DABS / DNR4190DABS /
DNX419DABS / DNR3190BTS only)
5 Touch [Viewing Angle].
6 Select a viewing angle.
7 Touch [
For details, see Viewing Angle (P.13).
For details, see Display Setup (P.77).
■ [Camera]
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
For details, see Camera Setup (P.69).
■ [DEMO]
Set the demonstration mode. Default is "ON".
2
Touch [Finish].
NOTE
• These settings can be made from the SETUP
menu. See Setup (P.74).
Autogoods "130"
].
].
].