Honeywell ScanPal EDA71 User Manual page 78

Enterprise tablet powered by android

Hide thumbs Also See for ScanPal EDA71:

Install Software Updates with AutoInstall

Important: The EDA71 must have power for the entire length of the upgrade process or it could

become unstable. Do not attempt to remove the battery during the process.

1. Swipe up from the bottom of the Home screen to access all apps.

2. Tap Settings

3. Tap the toggle button to turn Provisioning mode On.

4. Save the upgrade file (*.zip or *.apk) to the following folder on the EDA71 tablet:

5. Swipe up from the bottom of the Home screen to access all apps.

6. Tap AutoInstall Settings

7. Tap Packages Update from the AutoInstall Settings screen.

8. Once installation is complete, turn Provisioning mode Off.

Note: Some updates do not require the tablet to reboot before installation.

Optional microSD Card Method

The EDA71 comes equipped with a microSD card socket. You can install an

upgrade from a microSD card you insert in the tablet.

Important: The EDA71 must have power for the entire length of the upgrade process or it could

become unstable. Do not attempt to remove the battery during the process.

1. On the EDA71, swipe up from the bottom of the Home screen to access all apps.

2. Tap Settings

3. Tap the toggle button to turn Provisioning mode On.

4. Tap AutoInstall Settings

5. Press and hold the Power button, and then tap Power off.

6. On your workstation (e.g., laptop, desktop tablet), format the microSD card and

7. Save the upgrade file in the autoinstall folder.

8. Install the microSD card in the EDA71, and then press the Power button.

> Honeywell Settings > Provisioning mode.

•

Internal shared storage\honeywell\autoinstall

Software upgrades saved to this folder for installation, do not persist when a

Full factory reset or Enterprise data reset is performed.

The tablet automatically initiates a reboot and installs the

software upgrade. The system update screen appears during the upgrade

process. When the update is finished, the lock screen appears.

> Honeywell Settings > Provisioning mode.

create a \honeywell\autoinstall folder on the root of the card.

and verify Autoinstall is enabled

. Verify AutoInstall is enabled

EDA71 User Guide