Honeywell ScanPal EDA71 User Manual page 23

Enable Vibrate Mode
You can quickly enable Vibrate mode so the tablet vibrates instead of emitting
sound for notifications and rings. If you still want to hear alarms, turn on the
Alarms only feature.
Note: The Vibrate mode varies by OS version.
Depending on OS version:
1. Press the Volume down button until the tablet vibrates.
2. To turn on the Alarms only feature, press the Volume Down button again with
OR
1. Press one of the Volume buttons until the volume slider appears.
2. Tap
The status bar at the top of the screen indicates the active mode:
•
•
Audio Settings
This section describes the audio settings you an configure in the Settings app.
To change audio settings, select the Settings app
Note: Sound settings are model dependent. Some settings may not be available for your
model type.
Sound Settings
Setting
Media Volume
Call Volume
Alarm Volume
Ring Volume
Vibrate for calls
Do Not Disturb
Shortcut to prevent
ringing
EDA71 User Guide
the volume slider open.
to toggle between Vibrate, Off, and On.
When Vibrate mode is active,
When Alarms only mode is active, the Do Not Disturb icon
Description
Use the sliders to set the volume for media (e.g., music, videos, and
games), calls, alarms and rings (notifications and ringtones).
Select to enable vibrate mode when the phone is ringing.
Select to set which notifications to let through when you have Do
Not Disturb turned On and when you want to be left alone.
Set Press Power & Volume Up together. Options include: Vibrate, Mute,
and Do Nothing.
appears.
and tap Sound.
appears.
13