Honeywell ScanPal EDA71 User Manual page 15

Remove the Battery
If your battery power is low, you need to either charge the battery in the tablet, or
replace it with a charged battery.
To change the battery:
1. Save all files and close any open applications.
2. Press and hold the Power button until the options menu appears:
3. Tap Power off.
Once the tablet is powered off:
1. Press down the battery cover safety button to move the lock to the unlock
2. Open the battery cover with the battery cover buckle handle.
3. Insert the battery (insert the non-connector side first, then press the battery
4. Press down the battery cover.
EDA71 User Guide
position.
down to establish a connection between the battery and the phone).
5