Honeywell ScanPal EDA71 User Manual page 29

Status and Notification Icons
Icon
Remap a Button or Key
You can change the default function of the physical buttons and keys.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the plus sign (+).
4. Press the button or key you want to remap.
5. Tap OK.
6. Select a tab to use for remapping, and then select or enter a value as required.
7. The remapping is displayed on the Keyremap screen.
EDA71 User Guide
Description
Pending alarm and Alarm is set
New text message or
multimedia message
Error with text or multimedia
message delivery
New email
Tablet is connected to a PC
with a USB cable
Synchronizing data
Error with sync or sign-in
Tablet is connected with
Ethernet
> Honeywell Settings > Keyremap.
• KEYS
Choose a key function to assign to the selected key.
• APPS
Select an app that will launch when the selected button is pressed.
• ACTIONS
Enter an action that will be executed when the button is pressed, for
example, "com.android.settings/com.android.settings.wifi.WifiSettings".
• TEXT
Enter a key combination that will be executed when the button is pressed, for
example, "CTRL,C". See the next section for more information.
Icon Description
Vibrate mode is turned On
Airplane mode is turned On
Bluetooth is turned On
SD card is full
Wi-Fi network is connected with full
signal strength
Wi-Fi network is connected but no
signal strength
Phone connected with full amount
of bars
Phone connected with full amount
of bars but no Internet connection
19