Honeywell ScanPal EDA71 User Manual page 30

Using TEXT Commands
You can use TEXT commands to map multiple keys or a key combination.
•
•
•
•
Restore Default Button Action
To restore the default button action:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the clean icon
4. Choose the remapped button(s) you want restored to the default setting(s).
5. Tap Delete.
6. Tap OK to confirm action.
Key WakeUp
Use Key WakeUp to set the buttons you want to use to wake the tablet from sleep
mode. The keys (buttons) that can be used depend on the mobile device model.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Key WakeUp.
3. Turn keys on or off depending on your preference.
4. Tap Apply to save your settings.
5. To apply the default configuration, tap the Reset button.
20
Only lowercase characters are supported, but they must be entered in upper
case. For example, entering "H,E,L,L,O" will produce "hello". "H,e,l,l,o" will produce
"h". To remap to a string with capital letters like "HELLO", use a series of
keycombinations like, "CAPS_LOCK,H,CAPS_LOCK,E,CAPS_LOCK,L,CAPS_
LOCK,L,CAPS_LOCK,O".
Shifted characters can be remapped in the format SHIFT,<key>. For example,
"SHIFT,1" returns "!", "SHIFT,2" returns "@", etc.
A space must be defined using the Keyname like "A,SPACE,B".
Key names separated by comma are considered a string not a key, so
"F,1,E,N,T,E,R" will produce the string "f1enter". "F1,ENTER" will produce the
events as if Function Key 1 and an Enter key have been pressed.
> Honeywell Settings > Keyremap.
• Tap the check box next to the button.
OR
• Tap All Select to choose all the buttons.
.
EDA71 User Guide