Rf Power Control - Honeywell ASPIRE-400 System Description, Installation And Maintenance Manual

Table of Contents

Advertisement

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Description
GNSS Sensor Status
(2)
There are no criteria on selecting a navigation solution when having 2 equal preference
valid navigation solutions. Any method of selection is acceptable.
(3)
For each navigation solution, the ACD remains with its current label(s) until one of the
following occurs:
(a)
(b)
B.

RF Power Control

(1)
The SDU is designed to interface and control multiple RF configurations. These vary in
the following ways:
(a)
(b)
(c)
(d)
(e)
(f)
(2)
The RF configuration items are generally ORT specified, but in some cases, such as type
of antenna, they may also be communicated by the Antenna.
(3)
The ACD manages the EIRP of each RF carrier to the level associated with the ORT
identified terminal class.
(4)
Based on ORT settings the ACD determines Antenna Gain by the antenna gain reports.
(5)
In a multichannel SDU, the RF power management algorithm:
(a)
(b)
(c)
(d)
(6)
The ACD calculates the back-off to send to the HPA considering the following:
(a)
(b)
(c)
(d)
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
ASPIRE-400
Table 2-6. Navigation Data (Continued)
Priority
In some instances, these
labels will not be available.
Label invalid or no longer present.
a higher priority, valid label becomes available on the same or another interface
after 5 minutes (±30 seconds hysteresis).
Standalone or co-packaged HPA
Standalone or co-packaged DLNA
Gain of antenna
Type of antenna
Number of Antenna
Control Interfaces.
Maintain the Aircraft EIRPs for established carriers.
Determine the availability of RF power for additional RF carriers.
Maintain the HPA within its operating limits (e.g., to satisfy intermodulation
products requirements).
Prioritize the allocation of available RF power to multiple carriers, with regard to
the priority of each related service.
EIRP level for the ORT selected class of operation
Installed static losses
Gain performance of the installed antenna
HPA gain.
Labels
273 GNSS sensor status
101 GNSS HDOP
23-15-49
3rd rvw Draft as of:
29 January, 2020
Page 2-39
22 Apr 2019

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents