Ort Parameters - Honeywell ASPIRE-400 System Description, Installation And Maintenance Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
(a)
(b)
(6) The Aspire 400 SDU supports permanent and expiring licensing of the following PIES
features based on the features being ORT enabled:
(a)
(b)
(7) The Aspire 400 SDU supports non-expiring licensing of the following ACD controlled
features:
(a)
E.

ORT Parameters

(1) The Aspire 400 uses Secure and User ORT files to configure its operation.
(2) The Aspire 400 ORT files contain the subset of ARINC 781 ORT items that are applicable
to the Aspire 400 feature set. ARINC 781 ORT items not covered include:
(a)
(b)
(3) The Aspire 400 ORTs also include additional parameters for the Aspire 400 feature set
that are described ARINC 781.
(4) The ARINC 781 ORT items that are not applicable are explicitly listed as scope
exclusions.
(5) The following ORT parameters are not supported as they either do not apply to SBB
service or the associated function is no longer supported by the SDU or the function is
permanently set.
(a)
(b)
(c)
(d)
(e)
(f)
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
ASPIRE-400
AIS activation
2nd channel activation (Side B of DABC, provides basic PIES service unless
enhanced with additional PIES services).
PIES HDR
Router Capability.
NOTE: The 2nd channel activation license is also required to activate these
features.
Class 7 terminal operation.
Items for which only one value is applicable so option selection is not required.
Items that do not apply (e.g. items relating to Classic or Swift 64 operation).
CC Default Mode (A781 Ref A3):
1 Channel card operational mode is always SBB.
SCM (A781 Ref B18):
1 Always Required (Connected).
ISDN 1 (A781 Ref B19):
1 No ISDN port on SDU as repurposed to Ethernet.
ISDN 2 (A781 Ref B20):
1 No ISDN port on SDU as repurposed to Ethernet.
Circuit mode data for ground-to-air calls (A781 Ref E2):
1 Not applicable to SBB Ground-to-Air calls.
Global beam high rate (A781 Ref E3):
1 Not applicable to SBB return channel.
23-15-49
3rd rvw Draft as of:
29 January, 2020
Page 3-2
22 Apr 2019