Hercules DJControl Starlight How To Use Manual page 5

How to use
Hercules DJControl Starlight
5. Load a track on a deck in Serato DJ Lite
LOAD A TRACK
Select a track in the library with your mouse or
▪
touchpad.
Press and hold down the left mouse or touchpad
▪
button, and drag the track onto a deck in Serato DJ
Lite: the deck's border turns green.
6. Serato DJ Lite deck overview
WAVEFORM AREA
Large waveforms visually represent the songs currently
loaded on each of the decks:
Top waveform = deck 1 / bottom = deck 2.
▪
The different colors show frequencies: red= low /
▪
green= medium / blue = high.
Peaks in waveforms = beats.
▪
READ THE TRACK DATA
Release the left mouse or touchpad button: the
▪
track loads on the deck.
The deck displays the name of the track and of
▪
the artist, along with the track's duration and BPM
rate.
HOT CUES
If your song already contains Hot Cues, you will see
them represented as:
4 different-colored arrows on the waveform
▪
overview.
4 buttons with corresponding colors below the
▪
track duration and BPM value (in the example
below: red, orange, blue, yellow). If there aren't any
Hot Cues, these 4 buttons remain black.
5