Main Components Of The Machine - Sagola COMPACT 235 Instruction Manual

The COMPACT 235 is designed for the automatic
and manual washing of spray guns and parts using
both clean and recirculation solvent. It is fully pneu-
matic and uses a double diaphragm pneumatic pump
to function.
The structure is made entirely from stainless steel
AISI304.
The lower cabinet of the machine is designed to
contain the two drums of the clean and recirculation
solvent for washing and rinsing. The manual and

6. MAIN COMPONENTS OF THE MACHINE

6.1. MAIN COMPONENTS
1. Control panel
2. Lowel door
3. Basement
4. Automatic washing tub
5. Fume cupboard
6. Cigar filter with suction dirt and recycled (dirt)
7. Cigar filter with suction brush (dirt)
8. Draft tube spray (transparent) (clean)
9. Draft tube rinse (clean)
10. Filter "Paint Stop"
11. Plate CE
12. Work cabin
13. Earthing cable
14. Hole connection "earthing"
15. Quick coupling for compressed air grid
16. Brush
17. Exhaust pipe
18. Air gun
14
13
5. EQUIPMENT IDENTIFICATION
8
9
6
7
- 17 -
automatic washing operations are performed in the
upper part of the machine, called the tub level. The
washing tub is fitted with a system for the extraction
and expulsion of noxious vapours.
Inside the tub there is the washing spray jet system
where all the components of the spray guns can be
appropriately placed. Other small objects may also
be positioned and washed inside the tub. The machi-
ne is also equipped with an air blow gun to dry the
washed spare parts.
12
1
2
15
16
17
11
18
3
14
10
5
4