Beaba THERMOSPEED JPD-FR412 Instructions Manual page 7

Out of the measuring range display
In Ear mode, a temperature
reading of more than 42.0ºC
(107.6ºF)
HI
In Forehead mode, a temperature
reading of more than 42.2ºC
(108.0ºF)
In Object mode, a temperature
reading of more than 100ºC
(for reference only)
(212.0ºF)
In Ear mode, a temperature rea-
ding of less than 35.0ºC (95.0ºF)
In Forehead mode, a tempera-
ture reading of less than 35.0ºC
(95.0ºF)
In Object mode, a temperature
(for reference only)
reading of less than 0ºC (32.0ºF)
Recall 20 memories
01
In a power-on state, press the
Memory button enter the
memory mode.
When the Memory button is re-
leased, 01 will be shown, followed
36.5
by the recorded reading.
A long
beeps,the
backlight is
red.
A long
beeps,the
backlight is
red.
Silent,the
backlight is
green.
A maximum of 20 temperature
02
readings can be recalled.
When the maximum number of
records is exceeded, the earliest
memory data will be overwritten.
Note:
01 means the latest data.
36.8
No memory data / Clear memory data
The display is as shown , when
there is no more data checked
--- -
while recalling memories. Remove
2 dry batteries and after 10 se-
conds re-install the power to clear
all memory data.
No memory data / Clear memory data
In the power-on state, press and
--- -
hold the sound switch button for
about 2 seconds to switch the
sound on or off. When the sound
is turned on, it will beep once and
the mute symbol will be displayed
when the sound is off.
The symbol
mode and disappears in Un-mute
--- -
mode.
When the
power is turned
back on, there
are a long beep
and a green
backlight,
which then
turns into red.
When the
sound is turned
on, it sounds a
long beep and
the backlight is
green.
shows up in Mute